Baldor PCL1327M pressure washer motor is designed for hot or cold pressure washers, steam cleaners, portable and self-contained stationary systems for direct drive mount and double mounted designs.
Baldor PCL1327M Pressure Washer Motor Features
Baldor VEL11318A Specifications
Enclosure | ODTF |
Frame | 56HCY |
Frame Material | Steel |
Frequency | 60.00 Hz |
Motor Letter Type | Cap Start, Cap Run |
Output @ Frequency | 5.000 HP @ 50 HZ |
Phase | 1 |
Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
Voltage @ Frequency | 230.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals |
CSA |
Ambient Temperature | 40 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 23.000 A @ 230.0 V 24.000 A @ 208.0 V |
Design Code | - |
Drip Cover | Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 74.2 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 23.0 a |
Front Face Code | Drip Cover Mounting |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Not Inverter |
KVA Code | F |
Lifting Lugs | No Lifting Lugs |
Locked Bearing Indicator | Locked Bearing |
Motor Lead Exit | Cap Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 2 @ 12 AWG, A PH |
Motor Type | 3535LC |
Mounting Arrangement | F1 |
Number of Poles | 2 |
Overall Length | 14.10 IN |
Power Factor | 95 |
Product Family | General Purpose |
Pulley End Bearing Type | Ball |
Pulley Face Code | C-Face |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
Service Factor | 1.00 |
Shaft Diameter | 0.625 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Speed | 3450 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | Do Not Use |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 1 Location | KO |
Winding Thermal 2 | None |
Baldor PCL1327M Downloads